24 found, showing page 1 of 2 Page     1  2   >

FLOAT VALVE TROUGH-O-MATIC PLAS

"Little Giant Trough-O-Matic Float Valves automatically control the water level for most plastic and metal stock tanks, troughs, barrels, and pans. The all-plastic valve flows up to 245 gallons per hour and operates at pressure between 20 and 50 psi. The popular rugged plastic housing is molded from high-grade polystyrene for added strength and durability. Comes with expansion brackets to fit tanks rims up to 2"" thick and 4.325"" wide. Accepts a standard 3/4"" garden hose. Measures 7.5"" long by 3"" wide by 3.5"" high. Also available in aluminum housing (Item No. TM830T, sold separately)."

Part Number: 27440
U/M: / EA

$ 11.99 Details

FLOAT VALVE TROUGH-O-MATIC ALUM

"Little Giant Trough-O-Matic Float Valves automatically control the water level for most plastic and metal stock tanks, troughs, barrels, and pans. The all-metal valve flows up to 245 gallons per hour and operates at pressure between 20 and 50 psi. Durable aluminum housing with nylon orifice. Comes with expansion brackets to fit tanks rims up to 2"" thick and 4.325"" wide. Accepts a standard 3/4"" garden hose. Measures 7.5"" long by 3"" wide by 3.5"" high. Also available in plastic housing (Item No. TM825T, sold separately)."

Part Number: 27445
U/M: / EA

$ 15.99 Details

BUNK FEEDERCATTLE 5FT

AVAILABLE IN STORES ONLY
Lightweight, easy-to-move bunk feeder for large and small herds of livestock.
Welded grame is 1-3/4" diameter round tubular galvanized steel.
Durable poly liner is hled securely with rivets.
Fully replaceable bunk liner is a single piece fromed from 100% recycled materials with no seams or inserts.
Durable, corrosion-resistant powder coat red finish.

Part Number: 73920
U/M: / EA

$ 119.99 Details

CALF HUT STANDARD

AVAILABLE IN STORES ONLY
L--79", W--54", and H--46"
Protects calves and small animals from weather extremes.
Opaque material prevents overheating in summer temperatures.
Rear vent openings

Part Number: 91745
U/M: / EA

$ 299.99 Details

NURSING BOTTLE 2QT SCREW NIPPLE

"Bottle is sturdy and sanitary, made of FDA-approved, food-grade polyethylene plastic that is durable yet translucent enough so you can see the content level. Nipple is made with a special rubber formula to prolong nipple life and improve pliability. Threaded top for a secure fit. Bottle is 4.25"" square by 10"" high, holds 2 quarts. Nipple is 1"" diameter by 3"" long."

Part Number: 93145
U/M: / EA

$ 4.49 Details

NIPPLE SCREW ON NURSING BOTTLE

"This is a tough nipple that can withstand aggressive nursers yet is soft and pliable. Made with a special rubber formula for long life and improved pliability. This nipple style must be used with a Little Giant Screw-On Nipple Cap (Item Nos. 93SC and 93SCPK, each sold separately); the nipple does not attach to the bottle with out separately purchased Screw-On Cap. Nipple is 1"" diameter by 3"" long."

Part Number: 93150
U/M: / EA

$ 2.49 Details

MANUEL HEADGATE W/NEK EXTEND(SO)

AVAILABLE BY SPECIAL ORDER ONLY. PLEASE SEE STORE FOR DETAILS.

Part Number: 105815
U/M: / EA

$ 1,099.99 Details

M-SERIES SELF-CATCH HEADGATE(SO)

AVAILABLE BY SPECIAL ORDER ONLY. PLEASE SEE STORE FOR DETAILS.

Part Number: 130925
U/M: / EA

$ 899.99 Details

THRIFTY ROUND HAY FEEDER

AVAILABLE IN STORES ONLY

Part Number: 147435
U/M: / EA

$ 169.99 Details

THRIFTY BUNK FEEDER 10 FT

AVAILABLE IN STORES ONLY.

- 1 5/8" tubular base.
- 18" tall, 26" wide, 12" deep.
- One piece heavy duty molded liner.
- Rounded corners.
-15.5 cu. ft. capacity.
- 16 gauge steel.
- Four legs.
- High-grade galvanized steel, ultra-protected powder coat bright red and gunmetal grey.

Part Number: 147445
U/M: / EA

$ 129.99 Details

ROUND HAY FEEDER HD 2 PIECE

AVAILABLE IN STORES ONLY
- 46" tall, 8' diameter.
- 14 gauge steel.
- 1 1/4" diagonals and vertical bars.
- 15 vertical bars on open feeder.
- Hardware included.
- Ultra-protected powder coat bright red.

Part Number: 147480
U/M: / EA

$ 249.99 Details

ROUND HAY FEEDER HD SHEETED

AVAILABLE IN STORES ONLY
- 46" tall, 8' diameter.
- 14 gauge steel.
- 1 1/4" diagonals and vertical bars.
- 15 vertical bars on open feeder.
- Hardware included.
- Ultra-protected powder coat bright red.

Part Number: 160325
U/M: / EA

$ 319.99 Details

SALT BLOCK HOLDER

"This wire metal Salt Block Holder gives maximum exposure of the block to your livestock, while providing protection of the corners and deterring animals from removing the block. Vinyl dipped for added protection and rust prevention. Easily attaches to any stall, post, or wall with fencing staples or screws (not included). Measures 3.125"" long by 5"" wide by 5.625"" high, holds one 4-lb. salt or mineral block."

Part Number: 196035
U/M: / EA

$ 5.49 Details

PROTEIN BLOCK FEEDER HOOKOVER

"This universal block holder doubles as a grain or supplement feeder. Unique design allows for feeding 50-lb. salt, mineral, or protein blocks, as well as loose minerals and feed for cattle, horses, goats, sheep, alpacas, and llamas. High sides prevent animals from knocking the block out of the holder and reduce their ability to gnaw on the corners, reducing waste and saving money. Universal secure hook-over mounting on wire livestock panel or 2-by-wide board. Made of tough, impact-resistant, high-density polyethylene which protects against warpage, stress cracks, and UV damage. Measures 12.63"" long by 14.25"" wide by 9.69"" high, holds one 50-lb. salt/supplement block or 6.5 quarts."

Part Number: 213765
U/M: / EA

$ 16.99 Details

GOAT TROUGH-HOOK OVER -9QT

"A great little feeder for goats, sheep, alpacas, and llamas. Ideal in creep pens or when feeding multiple animals together. Unique design helps reduce feed waste while promoting animal safety and improved health. Galvanized steel grid forms six feeding slots; helps keep boss animals from pushing others out while eating. The grid also adds strength to the feeder, and its reinforced hooks provide extra support on the ends. Made of tough, impact-resistant, high-density polyethylene which protects against warpage, stress cracks, and UV damage. Universal secure mounting on any 2-by-wide board or wire livestock panels makes this a great indoor/outdoor trough for barns, yards, and show pens. Mounting hardware included, light assembly with screwdriver required. Measures 37.75"" long by 8.44"" wide by 4.72"" high, holds 9 quarts (2.25 gallons)."

Part Number: 244350
U/M: / EA

$ 19.99 Details

HAY SAVER FEEDER CONE (SO)

HAY SAVER FEEDER CONE (SO)

Part Number: 550180
U/M: / EA

$ 329.99 Details

FEEDER MINERAL 3 TRAY 250LB

FEEDER MINERAL 3 TRAY 250LB

Part Number: 590530
U/M: / EA

$ 169.99 Details

CATTLE SQUEEZE CHUTE STD CCA

CATTLE SQUEEZE CHUTE STD CCA

Part Number: 604130
U/M: / EA

$ 1,899.99 Details

CATTLE SWEEP TUB 21'X11'X88"

CATTLE SWEEP TUB 21'X11'X88"

Part Number: 604135
U/M: / EA

$ 1,749.99 Details

BLACK FEED PAN 10QT

"You'll never have too many of these versatile pans, made of tough, impact-resistant DuraFlex plastic. Great for pet and livestock feeding, but you'll find a hundred other uses around your farm, ranch, home, or shop. 18.5"" diameter by 5.25"" high, holds 10 quarts (2.5 gallons). Also available in other colors and sizes."

Part Number: 745484
U/M: / EA

$ 8.99 Details
24 found, showing page 1 of 2 Page     1  2   >